Toyota Camry Tail Lamp Outer 2024+ | Outer Rear Light Assembly for XSE / LE / SE

Reliable Replacement for OEM 81550‑AQ020 / 81560‑AQ020 | Better Rear Visibility & Safety

Fitment summary:

- Vehicle: Toyota Camry

- Model year: 2024+

- Position: outer tail lamp (the lamp section mounted on the quarter panel, left/right)

- OE references: 81550‑AQ020 (LH), 81560‑AQ020 (RH)

1. Typical situations where you need this part

- Light rear‑end or parking impacts where only the outer lamp on one side is cracked or chipped;

- Age‑related issues on early 2024+ cars: moisture inside, hairline cracks, faded lenses hurting appearance and visibility;

- Demo, fleet or used‑car prep where the rear of the car should look "as fresh as the mileage suggests".

2. What the outer tail lamp does visually & functionally

- It extends the tail, brake and turn‑signal functions into the corners of the rear body, where following drivers notice them first;

- Clear lens areas and red sections are laid out for a clean separation of functions-tail, brake and indicator are easy to distinguish at a glance;

- The housing contour follows the new‑generation Camry rear design, so once fitted, panel gaps and body lines remain consistent with the original look.

3. Fitment & installation

- Developed around OE 81550‑AQ020 / 81560‑AQ020 dimensions, bracket locations and connector layout:

1) Remove or loosen the trunk trim / bumper area near the lamp;

2) Disconnect the harness and remove the damaged outer lamp;

3) Install the new unit, plug into the factory harness and secure it using the original fixing points.

- Designed as an OE‑style swap: no heavy modification to wiring or bodywork in standard repairs, which keeps labour time and risk under control.

4. How to position this part in your program

- For distributors / collision networks:

- Combine with rear bumper covers, reinforcements, trunk lid and inner tail lamps as part of a 2024+ Camry rear‑end repair package;

- Treat it as a core stock number for the latest Camry tail lamp group, covering insurance work, private owners and fleet customers.

- For workshops / online sellers / end users:

- Workshops can offer single‑side replacement after minor damage, or recommend pair replacement when both sides look aged;

- Online, it fits well under keywords like "Toyota Camry 2024 outer tail light / tail lamp outer assembly".

5. Packing & logistics

- Supplied as individual LH or RH units, or as a matched pair if required;

- Each lamp is protected with internal foam, corner guards and protective bags to minimise scratches and broken tabs during transport;

- Cartons can be labeled "Toyota Camry 2024+ – Tail Lamp Outer LH / RH – 81550‑AQ020 / 81560‑AQ020" so your warehouse and workshops can route the correct lamp to the right vehicle quickly without opening every box.